Retro Basic PSU by Unilab

Retro Basic PSU by Unilab
B8R04365

Product code: B8R04365

GBP99.95
GBP119.94 inc VAT
Out of stock
Quantity:

Product Description

The entry level power supply in the Unilab Retro range. The Lockable Power Unit provides a.c. or d.c. at 2, 4, 6, 9 or 12 volts, at up to 4 amps. This unit is well suited to everyday power requirements, such as basic electricity, ray optics boxes and immersion heaters. The voltage is selected using a five-position switch, and can be locked either at a particular voltage, or within a range of voltages, by way of hex socket screws surrounding the selector switch. An Allen key is provided for the teacher or technician to set the desired locks.

The form of the output is set by a separate switch, either a.c. or unsmoothed, unregulated d.c. Two shrouded 4mm sockets provide the output, and the shroud can be partially unscrewed for other types of connection, such as bare wires. a.c. and d.c. are output from the same sockets, and never simultaneously, preventing students from connecting the a.c. and d.c. outputs together.

The unit has two in-built layers of protection. The first is a thermal trip on the secondary circuit, with a reset button for when the problem load has been disconnected. The second is a 1A mains fuse, accessed from the front panel, on the primary circuit.

  • Locking mechanism to limit or pre-set the voltage available to students in specific experiments.
  • 4mm output socket/terminals
  • Thermal "trip", which can be reset shortly after removal of the excess load
  • Robustly made with captive mains lead and integral cable wraps on the back panel
  • Protected by a time delay mains fuse in the front panel.

Complies to EN61010 2010, certificate available on request.

Size: L290 x W165 x H165mm.

Further Information

Brand
Unilab
Fuse (front panel)
T1A (time delay)
Humidity Limits (%RH)
10 - 90
Mains input
230V ac 50Hz
Max current (A)
4
Maximum Voltage
12V
Output Control
stepped
Output Range (V)
2,4,6,9,12 ac or dc unsmoothed
Power rating (VA)
80
Power Supply Type
Retro Basic
Product Type
Power supply units
Temperature limits (°C)
-5 to 50

Documents

GBP99.95
GBP119.94 inc VAT
Out of stock
Quantity:

The entry level power supply in the Unilab Retro range. The Lockable Power Unit provides a.c. or d.c. at 2, 4, 6, 9 or 12 volts, at up to 4 amps. This unit is well suited to everyday power requirements, such as basic electricity, ray optics boxes and immersion heaters. The voltage is selected using a five-position switch, and can be locked either at a particular voltage, or within a range of voltages, by way of hex socket screws surrounding the selector switch. An Allen key is provided for the teacher or technician to set the desired locks.

The form of the output is set by a separate switch, either a.c. or unsmoothed, unregulated d.c. Two shrouded 4mm sockets provide the output, and the shroud can be partially unscrewed for other types of connection, such as bare wires. a.c. and d.c. are output from the same sockets, and never simultaneously, preventing students from connecting the a.c. and d.c. outputs together.

The unit has two in-built layers of protection. The first is a thermal trip on the secondary circuit, with a reset button for when the problem load has been disconnected. The second is a 1A mains fuse, accessed from the front panel, on the primary circuit.

  • Locking mechanism to limit or pre-set the voltage available to students in specific experiments.
  • 4mm output socket/terminals
  • Thermal "trip", which can be reset shortly after removal of the excess load
  • Robustly made with captive mains lead and integral cable wraps on the back panel
  • Protected by a time delay mains fuse in the front panel.

Complies to EN61010 2010, certificate available on request.

Size: L290 x W165 x H165mm.

Further Information

Brand
Unilab
Fuse (front panel)
T1A (time delay)
Humidity Limits (%RH)
10 - 90
Mains input
230V ac 50Hz
Max current (A)
4
Maximum Voltage
12V
Output Control
stepped
Output Range (V)
2,4,6,9,12 ac or dc unsmoothed
Power rating (VA)
80
Power Supply Type
Retro Basic
Product Type
Power supply units
Temperature limits (°C)
-5 to 50

Documents

You May Also Like