Retro Regulated PSU by Unilab

Retro Regulated PSU by Unilab
B8R04367

Product code: B8R04367

GBP159.99
GBP191.99 inc VAT
In stock
Quantity:

Product Description

The most sophisticated of the Unilab Retro range, the Regulated Lockable Power Unit offers smooth, regulated d.c. at 2, 4, 6, 9 or 12 volts, at up to 4 amps. This unit is for quantitative circuit work, e.g. Ohm's law or where a constant voltage is required under variable load. The voltage is selected using a five-position switch, and can be locked either at a particular voltage, or within a range of voltages, by way of hex socket screws surrounding the selector switch. An Allen key is provided for the teacher or technician to set the desired locks. The power is output from shrouded 4mm sockets, and the shroud can be partially unscrewed for other types of connection, such as bare wires. The unit has two in-built layers of protection. The first is a thermal trip on the secondary circuit, with a reset button for when the problem load has been disconnected. The second is a 1A mains fuse, accessed from the front panel, on the primary circuit.

  • Locking mechanism to limit or pre-set the voltage available to students in specific experiments.
  • 4mm output socket/terminals
  • Thermal "trip", which can be reset shortly after removal of the excess load
  • Robustly made with captive mains lead and integral cable wraps on the back panel
  • Protected by a time delay mains fuse in the front panel.

Complies to EN61010 2010, certificate available on request.

Size: L290 x W165 x H165mm.

Further Information

Brand
Unilab
Humidity Limits (%RH)
10 - 90
Mains input
230V ac 50Hz
Max current (A)
4
Maximum Voltage
12V dc
Output Control
stepped
Output Range (V)
2,4,6,9,12 dc only, regulated
Power rating (VA)
108
Power Supply Type
Retro Regulated
Product Type
Power supply units
Temperature limit (°C)
-5 to 50

Documents

GBP159.99
GBP191.99 inc VAT
In stock
Quantity:

The most sophisticated of the Unilab Retro range, the Regulated Lockable Power Unit offers smooth, regulated d.c. at 2, 4, 6, 9 or 12 volts, at up to 4 amps. This unit is for quantitative circuit work, e.g. Ohm's law or where a constant voltage is required under variable load. The voltage is selected using a five-position switch, and can be locked either at a particular voltage, or within a range of voltages, by way of hex socket screws surrounding the selector switch. An Allen key is provided for the teacher or technician to set the desired locks. The power is output from shrouded 4mm sockets, and the shroud can be partially unscrewed for other types of connection, such as bare wires. The unit has two in-built layers of protection. The first is a thermal trip on the secondary circuit, with a reset button for when the problem load has been disconnected. The second is a 1A mains fuse, accessed from the front panel, on the primary circuit.

  • Locking mechanism to limit or pre-set the voltage available to students in specific experiments.
  • 4mm output socket/terminals
  • Thermal "trip", which can be reset shortly after removal of the excess load
  • Robustly made with captive mains lead and integral cable wraps on the back panel
  • Protected by a time delay mains fuse in the front panel.

Complies to EN61010 2010, certificate available on request.

Size: L290 x W165 x H165mm.

Further Information

Brand
Unilab
Humidity Limits (%RH)
10 - 90
Mains input
230V ac 50Hz
Max current (A)
4
Maximum Voltage
12V dc
Output Control
stepped
Output Range (V)
2,4,6,9,12 dc only, regulated
Power rating (VA)
108
Power Supply Type
Retro Regulated
Product Type
Power supply units
Temperature limit (°C)
-5 to 50

Documents

You May Also Like